Very Simple Strategies How To Bridge A Car Audio Amplifier

31.01.2010 | Author: Amanda Leer | Posted in Business

People who like to listen to loud music are the ones who are likely to bridge car amplifiers. By doing this the volume of the audio is increased to a great extent and also improves the clarity of the sound. More power is also provided to the speakers. Its function is similar to that of the subwoofer. The very important fact is that the connection should be done properly the first time before testing it. It is very important to know how to bridge two car audio amps since if the connection is done in the wrong way damages can be made to speakers and also the amps itself. Due to the high power the circuits can get burnt and damage it.

The easiest way to improve and enhance the sound of speaker is to connect two car amplifiers together . This also gives lot of power for bigger speakers such as woofers. We may need few things before we start doing this job . They are wrenches, pliers, wire strippers, wire rated for the amplifiers and of course the two amplifiers which we are planning to bridge.

Utmost care must be taken before buying the amplifiers. The manuals must be thoroughly read and must be made sure that both the amplifiers that are purchased can be bridged. If they can be bridged the amplifiers can be bought. If it is not sure then it is advised not to buy those.

Next step is to stop the power supply to the amps. Power supply to the amps can be stopped easily by disconnecting the positive cable from the battery of the car. This should be done before any connections are made. To remove the cable we may take help of the wrenches and pliers. Power supply should be completely stopped till our work is completely done .

There will be a bridge switch at the rear end of each amp usually. Turn on that switch in case if it is there. Take a wire . Remove the insulation to about half inch in both the ends of the wire taken.

The insulation is then stripped for half an inch from both the ends of the wire. The wire is then connected between the two amplifiers. In one it is connected in the positive end of an amplifier and the other end is attached to the negative of the second amplifier. This is done by wrapping wire so that it surrounds the terminals. Then the knobs are screwed back to position. Generally there is colour code for the two terminals. The colours for negative and positive are black and red respectively.

The speakers and the terminals in the bridged amplifier can be connected by the wire. The positive wire is connected to the terminal which is positive and in the same way negative is connected to the negative of the speaker.

One must know how to bridge two car audio amps, using which he can improve his speaker sound easily.

Want to find out more about Car Hifi, then visit Author Name\’s site on how to choose the best Car Audio for your needs.

Bookmark It